Curtains. Saturday , December 17th , 2016 - 23:00:33 PM
Once you are done with measuring and cutting the fabric, you now need to hem the fabric on all sides. While doing so, make sure that you are leaving inch of hem allowance. Then place the fabric right side down and divide it into four equal and vertical sections. Mark the sections and label the three lines (as A,B,C or 1,2,3, etc.). Again measure the lines and create "x" mark on every 8 inches on each line. Make sure you start from the bottom. Attach the curtain rings on the "x" marks that you created. You can use hand sewing method for doing so. Then, join the loop tape on the shade to the hook tape of the bottom. This will help you to hang the shades. Lastly, place closing hook on each bottom ring of each row. Now, lift the hooks so that they catch the rings next to them. Repeat the same with the rest of the rows of the rings and you are done!
Rings and pinch clips are similar: they slide on the curtain rod and attach to the curtains. In other words the rod and rings or clips are visible, sort of like some shower curtains.
When you purchase blinds, the first thing to remember is that they must be waterproof. It does not matter whether these come in contact with water or not, they must be suitable for moist and humid condiions. In shower areas, there is a lot of moisture which slowly damages the coverings which are not waterproof. You can also pick ones which slightly reduce the light entering this area. In any case, privacy is the main concern and shades must be chosen so that they provide complete privacy.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does Enotecaculdesac claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.