Curtains. Sunday , July 02nd , 2017 - 14:00:33 PM
When a vane is torn, it has to be replaced by a new one. For this, the damaged slat needs to be taken out from the rail first. Move the vane slightly in the upward direction and turn it a bit to take it out of the clip, and then pull it down. If the clip is attached to a string, then you have to take out the chain not only from the damaged vane but also from all those vanes which lie in between that vane and the chain anchor point.
I also updated the drapery rod too. The process is very simple. Take the rod, Polish it with the rough carbon paper for clearing the previous color. Then choose your color and paint them. Leave it for dry, then use it.
Take the new replacement vane and move it into the holder or the clip. While you install the new vane, care should be taken that its orientation is the same as the other vanes. If you find it difficult to push in the vane into the clip, you can use a screw driver to exert some extra pressure. Do not apply too much of force as that may lead to breakage of the clip. Finally, pass the chain through the replaced vane and other adjacent vanes from which it was removed.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does Enotecaculdesac claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.