Christabel Daniella. Curtains. November 04th , 2016.
After that is done mount the right and left hand brackets about 1/8 inches wider than the pencil marks so that when the blind is set into the brackets it fits.
A great idea for DIY bay window curtain rods is to make them with the help of dowels. To make these functional bay window curtain rods, you will need a long dowel, decorative drawer knobs, a hand-held drill, a handsaw, T nut bolts and spray paint. First measure the width of all the three window casements of the bay window. Now cut the dowel into three pieces, according to the dimension of the window. If your bay window is not the three window casement style, but consists of one wide window, then you need not cut the dowel at all. Drill holes at the ends of the dowel by attaching a drill bit to a hand-held drill. While drilling holes into the dowel, make sure that it is properly centered. Attach T nut bolts on each holes of the dowels and make sure it is flush with the dowel ends. Screw in the decorative drawer knobs on each end of the dowels. If you want to give the curtain rod a more finished look, then spray paint it with a matt or metallic textured paint. Install curtain rods on the brackets of the bay windows.
You probably feel that cafe curtains are a great item to sparkle up your windows and your rooms. They really are giving something special to the atmosphere, a certain vibe that is refreshing and different from others.
Before you actually start hanging up vertical blinds, you need to ensure that you have everything you need in order to hang up the blinds. For the process of hanging up vertical blinds you will need a tape measure, a level, a drill, a screwdriver, marker or pencil, the blinds, and studs or brackets. Before you actually start hanging up the blinds you need to take the proper measurements for the blinds. Vertical blinds are either hung on inside mounts or outside mounts and depending on what type of mounts you choose, the method of measurement will differ. For an inside mount, you need to measure the width of the inside of the window at the top, middle, and the bottom and use the shortest width. The shortest height is taken into consideration after measuring the height at the right, center, and left. You will also need to measure the depth of the window frame. Normally you need a depth of at least two and a half inches. For the outside mounts, you will need to measure the width, across the window and then add four inches on each side. Ensure that you leave about half an inch of clear space at the bottom. The height of the window can be measured by measuring the center of the window from the top to bottom. Ensure that you add six inches to the height that you have measured. Once you have decide on the type of mount you want to use, follow the simple instructions given here to learn how to hang vertical blinds.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does Enotecaculdesac claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.