Sela Anamarija. Curtains. April 04th , 2017.
A great idea for DIY bay window curtain rods is to make them with the help of dowels. To make these functional bay window curtain rods, you will need a long dowel, decorative drawer knobs, a hand-held drill, a handsaw, T nut bolts and spray paint. First measure the width of all the three window casements of the bay window. Now cut the dowel into three pieces, according to the dimension of the window. If your bay window is not the three window casement style, but consists of one wide window, then you need not cut the dowel at all. Drill holes at the ends of the dowel by attaching a drill bit to a hand-held drill. While drilling holes into the dowel, make sure that it is properly centered. Attach T nut bolts on each holes of the dowels and make sure it is flush with the dowel ends. Screw in the decorative drawer knobs on each end of the dowels. If you want to give the curtain rod a more finished look, then spray paint it with a matt or metallic textured paint. Install curtain rods on the brackets of the bay windows.
The innovative curved shower curtain rods expand the shower space by at least 25% to 35%. The simple installation of the shower rods instantly increase the width of your bathroom by at least 6" and make your bathroom look much more spacious than normal size. The curved shower curtain rods are very easy to install and comes in package with at least four wood screws, four tile anchors, four sheetrock anchors and two setscrews and an Allen wrench.
This is not an unattainable task if you have the fabric ready at home. Knowing how to sew curtains will help you to easily fix the grommet rings to the curtains and then hang it. You can purchase the kit for making grommet curtains from any upholstery shop. They will provide you the correct size for the rings and the rod, that has to be passed through it. The steps are explained in the following segment. First take the measurement of the curtain rod and the ring so that they complement each other. Buy the kit accordingly, or else you can purchase the materials separately and then assemble them. Decide how many rings you will require for fixing on the drape. The density of the pleats will depend on the spacing of the rings. If you fix the rings at least 1 inch apart from each other, then, the curtain fabric will be overlapped in a compact manner. This makes the curtain look much more voluminous. Before attaching the rings, you have to pierce holes of the same size to that of the ring on the panel of the curtain. Fold the panel and cut it in a circular fashion. Now sew the sides by hemming it. This forms the attachment zone of the grommet rings. If you have purchased a kit, you will get the punching tool for fixing the rings along with it. Read the instructions mentioned on the label and then start the process. The rings are double layered and you can start fixing according to the suggested technique. Punch it tightly so that they do not fall off, and fix it on the wrong side of the curtain. Once the holes are ready, you can easily pass the rods through it. Pleat it well so that the drapes look compact and full. Drape Designs
For example, curtain walling metal technology offers the Latitude system which particularly gives a strong horizontal focus and is excellent in drawing attention and drama to a glass elevation.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does Enotecaculdesac claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.