Curtains. Monday , February 06th , 2017 - 23:00:39 PM
First measure the height and width of the curtain and ascertain at what height of the window you want to hang the curtains. Cut one single fabric panel with this dimension, making sure that you add 2 inches on each side for the hem. Place the fabric panel wrong side up on your workstation and then place the curtain rod over it. Fold the to edge of the fabric panel over the curtain rod and mark the point where the fabric edges meet. Remove curtain rod and attach the fusing tape on the top edge of the fabric panel.
'First decide if you want a track or a pole 'It's best to use a metal tape measure as it will be more accurate 'Your track or pole should be placed approximately 15cm (6") above your window top and should be wider than your window by approximately 15-20cm (6-8") 'Measure the width of your track or pole excluding the finials (decorative endings on poles). Do not measure the window 'Add an extra 2.5cm (1") to your track/pole measurement. This will allow for your curtains to overlap in the middle when they are closed so as not to let in any light or draught
If you want to add larger finials at the end of the middle curtain rod, then consider installing bay window curtain rods in layers. The middle bay window curtain rod should be kept at a higher position than the other end curtain rods.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does Enotecaculdesac claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.