Kadri Janan. Curtains. December 18th , 2016.
After the long strip, I cut the strips in half and make them two strips. Then I folded the strips in half then iron them neatly. Then I aligned the unfinished edge of the trim fabrics with the right side of the panel edge. Then I sewed them using the 1/2 inches inseam. After sewing iron them again.
The clips that hold the vanes often break as they are mostly made of plastic. However, it is very easily replaced and sometimes, you do not even need any tools for that. Take out the broken clips out of the head rail of the blinds. If you are using a screw driver for this purpose, ensure that it does not damage the vane. While replacing the new clip, take care that it is fitted well into the head rail or else it cannot secure the vane properly. After that, insert the vane into the clips in the same alignment as other vanes are.
If you have metal windows and doors, then here's a good option to consider. Magnetic blinds for metal doors and windows look clean and classy. These are easy to install and add privacy too. Let us tell you that no tools are required to hang these on metal or steel doors and windows. You can also get aluminum blinds, which need to be simply snapped in the magnetic brackets, which easily adhere to the metal doors and windows. If you are searching for blinds with a 'no-drill' feature, these are the perfect ones to be checked out. What's more, you can also have magnetic blinds for French doors, for both styles, swinging and sliding ones.
Before washing, it is recommended that you remove all the dust particles from both sides of the blinds by using a vacuum cleaner. Ensure that you vacuum the blinds across the slats to avoid damage.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does Enotecaculdesac claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.