Curtains. Wednesday , February 01st , 2017 - 02:00:45 AM
Set up the crescent shower curtain rod together, referring to the instructions which came along with it. Place it up on the wall, and determine precisely where you think its position should be, with relation to the height and depth. The bracket would be required to be positioned at least three inches farther in as compared to the set up of the old rod which you removed. The guidelines provided with the rod would suggest two alternatives depending on whether you have an oval tub or a conventional one.
Once you are done with measuring and cutting the fabric, you now need to hem the fabric on all sides. While doing so, make sure that you are leaving inch of hem allowance. Then place the fabric right side down and divide it into four equal and vertical sections. Mark the sections and label the three lines (as A,B,C or 1,2,3, etc.). Again measure the lines and create "x" mark on every 8 inches on each line. Make sure you start from the bottom. Attach the curtain rings on the "x" marks that you created. You can use hand sewing method for doing so. Then, join the loop tape on the shade to the hook tape of the bottom. This will help you to hang the shades. Lastly, place closing hook on each bottom ring of each row. Now, lift the hooks so that they catch the rings next to them. Repeat the same with the rest of the rows of the rings and you are done!
Solid Fabric Panels: These can be used for the same functions as a wooden sliding panel. They are available in room-darkening fabrics also, and can add to the beauty of your decor. They are easy to install too.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does Enotecaculdesac claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.