Curtains. Monday , November 07th , 2016 - 11:00:47 AM
Set up the crescent shower curtain rod together, referring to the instructions which came along with it. Place it up on the wall, and determine precisely where you think its position should be, with relation to the height and depth. The bracket would be required to be positioned at least three inches farther in as compared to the set up of the old rod which you removed. The guidelines provided with the rod would suggest two alternatives depending on whether you have an oval tub or a conventional one.
Whether your home is country style or more modern, wrought iron curtain rods and drapery hardware is complimentary to many different styles of furnishings, even in the office, wrought iron can be very elegant.
If there is a tear near the hole where the vane is attached to the clip of the rail, then the vane would fall down. To repair that tear, just cut a small piece of the vane from its lower end and paste it with glue on the torn joint. The size of the replacement piece should not be larger than required or else, the entire hole may get covered up. Hold the glued part tightly in between your fingers till the two pieces bond well with each other. Now, you can put it back to its position in the rail. If the slat is made of fabric material, then the torn part can be mended by needle and thread.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does Enotecaculdesac claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.