Curtains. Thursday , December 08th , 2016 - 10:00:48 AM
As mentioned above, the construction of the blinds allows it to act as a filter for light, leaving the room illuminated with a mild and pleasant glow. The honeycomb structure also acts as an insulator and limits the flow of incoming and outgoing air by trapping them midway, thus keeping the room at a steady temperature. Such cellular shades help maintain room temperature, by keeping it cool in the summer and warm in the winter. The larger the cell size, the better the insulation.
Before you actually start hanging up vertical blinds, you need to ensure that you have everything you need in order to hang up the blinds. For the process of hanging up vertical blinds you will need a tape measure, a level, a drill, a screwdriver, marker or pencil, the blinds, and studs or brackets. Before you actually start hanging up the blinds you need to take the proper measurements for the blinds. Vertical blinds are either hung on inside mounts or outside mounts and depending on what type of mounts you choose, the method of measurement will differ. For an inside mount, you need to measure the width of the inside of the window at the top, middle, and the bottom and use the shortest width. The shortest height is taken into consideration after measuring the height at the right, center, and left. You will also need to measure the depth of the window frame. Normally you need a depth of at least two and a half inches. For the outside mounts, you will need to measure the width, across the window and then add four inches on each side. Ensure that you leave about half an inch of clear space at the bottom. The height of the window can be measured by measuring the center of the window from the top to bottom. Ensure that you add six inches to the height that you have measured. Once you have decide on the type of mount you want to use, follow the simple instructions given here to learn how to hang vertical blinds.
Now lower the blind all the way and insert the pins into the bottom rail for hold down brackets and make a pencil mark on both the sides where you plan to install the hold-down brackets.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does Enotecaculdesac claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.